|About |Contact | Korean |

 

EChem News  Letter

e-mail address
Company Name
Country

Name


 

ZconTM Impedance Analyser

 

 

*         Feature

*  For versatile AC impedance experiment using external electronic load or potentiostat/galvanostat..

*  2 signal input channel(current and voltage)/1 signal output for sinewave

*  A flexible frequency generator/analyzer

*  Generate various waveforms (eg. Sinusoidal etc)

*  Designed for spectrum analysis in the

electrochemical field

*  Simulation and fitting with ZMANTM

*  High current application with external load and/or potentiostat/galvanostat

*  Software controlled function

*  Graphic-based user-interface

*  Dual real time graph (Bode, Nyquist, etc) during measurement

 

*         Description

 

ZCONTM impedance analyzer is spin off model from Z# multichannel impedance monitor. This model is for single channel application only.

 

ZCONTM provides all tools for the application of fuel cell stack,  battery pack , and general electrochemical study requiring  EIS measurement using external electronic load or potentiostat/galvanostat.

 

By employing electronic load, ZCONTM can be used to determine the efficiency of fuel cell and anodic/cathodic process mechanisms by calculating impedance with the measurements of I and E at given frequency.

The complete system is software-controlled and all functions such as ranging, calibration, and measurements can be automated.  

 

*         Software

*       Mode

*   With Electronic load

*   Frequency Response Analyzer (FRA)

*   High Frequency Resistometry (HFR)

*   With 3rd parties potentiostat/galvanostat

*   Galvanostatic Electrochemical Impedance Spectroscopy (GEIS)

*   Galvanostatic HFR (GHFR)

*   Potentiostatic EIS (PEIS)

*        Power spectrum display

*       Waveform Generation

 

 

Please refer to Z# specification sheet excepting channel number.

 

 

*         Supporting external load/Potentiostat

*        TDI dynaload RBL488 series

*        WonATech WEL Load

*        ZSTAT potentiostat/galvanostat

*        3rd parties potentiostat/galvanostat

 

Other model might be needed to set some parameters by manually.

Please contact with your regional distributor about other 3rd parties products’ availability with ZCONTM

 

*         Software (Z100 Navigator)

Z100 navigator is ZconTM control software. This can be used with external potentiostat/galvanostat or electronic load by setting for impedance measurement or waveform generator.

 

*       List of Impedance Techniques with Zcon

*   Frequency Response Analyzer (FRA)

*   High Frequency Resistometry (HFR)

*   Galvanostatic Electrochemical Impedance Spectroscopy (GEIS)

*   Galvanostatic HFR (GHFR)

*   Potentiostatic EIS (PEIS)

 

Transient recorder (Waveform generator)

 

Environment setting menu 

 

  

Parameter setting for each techniques

 

 

Monitoring                                                   Lassajous plot

 

 

AC Signal Input (power spectrum)   Result

 

Real time Nyquist plot            Real time Bode Plot

 

*         ZMANTM will be supplied for analysis of Zcon data at free of charge. Please refer to ZMAN introduction.