|About |Contact | Korean |


EChem News  Letter

e-mail address
Company Name




Low Current Multichannel Potentiostat/Galvanostat WMPG1000L(Le)

*         Application

*  Low current application (Max.10(100)mA)

*  Sensor application

*  Electroanalytical application

*  Micro battery application

*  Compact size

*  Max. 64 channel control per PC


System hardware is based on WMPG series multichannel potentiostat/galvanostat. The system contains independent channel controller, a multiplexed data acquisition circuitry. This system can provide two mode(General mode: general multichannel potentiostat/galvanostat with eight working electrodes, eight reference electrodes and eight counter electrodes or Sensor mode: a multi-potentiostat with eight working electrodes, one common reference electrode and one common counter electrode). The sensor mode is designed so that eight working electrodes are in the same electrochemical cell. The potential control range is following customer specification. Each electrode can be individually controlled, including on/off control, potential and current range settings.
Each substation can be used as independent system with
optional StartUp Kit or can be built up integrated system as add-on. These give flexibility to users application


*         Feature

*  For stable and accurate target

*  4 probe type true potentiostat/galvanostat circuit

*  High resolution 16 bit ADC/DAC: WMPG provides 0.0015% f.s resolution in control and acquisition both.

*  Channel isolation: To prevent any noise from the other channel, each channel is designed for isolation.

*  Multiple current ranges: 5 ranges. Auto/manual selection


*  For easy expansion/maintenance target

*   Channel Plug-in module: Plug-in module is easily upgradeable or modifying voltage/current range. Also if one channel is out of order, Just replacement is easiest way to clean the problem. Option module is plug-in type too. It means upgrade is very easy. For one board type per 8 channels, if one channel is out of order, user cannot use all 8 channels.

*   Substation add-on type: WMPG series can expand the channels up to 64 channels per system. When the user wants to expand the channels, he/she just adds the substation. One of modular systemís advantages is maintenance. If one substation is out of order in power supplierís part, the other substations can be run without dead time.

*         Inquiry: sales@wonatech.com

For higher power

*       Standard type type WMPG1000S(Max. current: 5A)

*       Mid power type WMPG1000M1(Max 100Watt/channel)

*       Mid power type WMPG1000M2(Max 200Watt/channel)

 *       Mid power type WMPG1000Dual(Max 400Watt/channel)

*       High power type WMPG1000HP(>400Watt/channel)

Related Links

*       SI Software Introduction

*       WMPG Catalog Download

*       WMPG operation manual Download