|About |Contact | Korean |
Standard Multichannel Potentiostat/Galvanostat WMPG1000S
System hardware was designed for stable and accurate instrument furthermore for easy expansion and maintenance. So WMPG series choose plug-in type module with independent power suppliers per 8ch substation. Each substation can be used as independent system with optional ‘StartUp Kit’ or can be built up integrated system as add-on. These give flexibility to users application.
For stable and accurate target
4 probe type true potentiostat/galvanostat circuit
High resolution 16 bit ADC/DAC: WMPG provides 0.0015% f.s resolution in control and acquisition both.
Channel isolation: To prevent any noise from the other channel, each channel is designed for isolation.
Multiple current ranges (WMPG1000S: 5 ranges): This improves the resolution and accuracy in control and measurement of current. Auto/manual selection
For easy expansion/maintenance target
Channel Plug-in module: Plug-in module is easily upgradeable or modifying voltage/current range. Also if one channel is out of order, Just replacement is easiest way to clean the problem. Option module is plug-in type too. It means upgrade is very easy. For one board type per 8 channels, if one channel is out of order, user cannot use all 8 channels.
Substation add-on type: WMPG series can expand the channels up to 64 channels per system. When the user wants to expand the channels, he/she just adds the substation. One of modular system’s advantages is maintenance. If one substation is out of order in power supplier’s part, the other substations can be run without dead time.
For higher power or lower current
|WonATech | WonA Building 7, Neunganmal 1-gil,SeoChoGu,Seoul,137-180 Korea | Phone:+82-2578-6516 | Fax:+82-2576-2635|