|About |Contact | Korean |


EChem News  Letter

e-mail address
Company Name



Mid Power type WMPG1000M1
Multichannel Potentiostat/Galvanostat


*        Application


*   Max. power: 100Watt per channel

*   Battery Test

*   Super capacitor Test

*   Fuel Cell Test

*   Electroplating,Electrosynthesis,Electrolysis

*   Pulse charge/discharge; option

*   Plug In channel Type

*   Various Safety protection

*   Other Electrochemical Experiment available

*   Universal Graphic function

And more & more …….


*         Feature


*   High precision

*   16bit(0.0015% full scale) ADC, DAC

*   5 current ranges (automatic/manual selection)

*   MOSFET type linear power supply circuit.

*   Shield cell cable to prevent EMI noise


*   Safety

*   Unique “Fail check?function: Automatic stop when measured value is different from control value by battery failure or wrong cell connection etc. => To protect system and cell.

E.g. Control value: 1Amp Measured value: 500mA then automatic stop the channel

*   System safety parameter: If the measured value is over system specification, Automatic stop the running channel

*   User defined safety condition setting: User can input safety level following test cell’s chemistry.

*   Automatic cell connection check: Before experiment, if the cell voltage value is near 0Volt, program gives the warning message for the operator to check the cell connection.

*   If operator did press stop function button by mistake, confirmation message box appears.

*   To prevent over current, poly-switch is located in each channel

*   Watchdog function: Stop “running channel(s)?on communication Failure.

*   While any channel is running, operator could not close the server program

*   If main program was down by unstable operating system, independent server program keeps the experiment (control & data acquisition) without dead time.


*   Maintenance & System expansion

*   Plug-In type channels

*   Power supply per 8channel

*   Easy expansion by adding plug in channel or by adding 8ch substation

*   Each channel has Poly switch instead of fuse.


*         Option

*  Auxiliary voltage & Temperature measurement

*   User can assign any temperature input or auxiliary voltage input to single or multiple channel(s) data set by his/her demand.

*   Customized auxiliary voltage range and temperature range is available.



*  Battery jigs

*   Universal Jig

*   Lithium polymer battery Jig


*         Mid power type Channel Power Limit

*   Each channel’s maximum power is 100Watt (Power= Max. voltage x Max. current x 2)

*   Max. current is 10Amp/channel

*   Max. voltage can be selected within channel power limit


For higher power or lower current

*        Low current type WMPG1000L(Max. current: 10(100)mA)

*        Standard type type WMPG1000S

             *       Mid power type WMPG1000M2(Max 200Watt/channel)

             *       Mid power type WMPG1000Dual(Max 400Watt/channel)

*        High power type WMPG1000HP(>400Watt/channel)

Related Links

*        SI Software Introduction

*        WMPG Catalog Download

*        WMPG operation manual Download