|About |Contact | Korean |
Virtual control panel........
BCO(Button click operation); User can do any task with just clicking the button:
Easy assignment of cycle test condition file to channel with combo box selection at anytime.
Synchronized change function of cycle test condition file for selected multiple channels.
Real time dual channel(V & I) strip chart display for selected channel or for all running channels with time scrolling mode or whole window mode.
Status bar displays channel status.
Various task function: run, stop, suspend, moving step etc..
Spying the contents of test program which assigned to channel
Assign temperature, AuxV and CalcV channel on virtual control panel
One stop test condition creation/modification
Parameter mixed input system
Unlimited number of test steps
Control values are voltage(CV), current(CC), power(CP), rest, C-rate, I.
Step flow are defined by next step, Loop and cycle
Cut-off conditions can be set by;
time, voltage, current, dV/dt, dI/dt, percentage capacity(FCC, FCD, LCC, LCD), cycle time, capacity, -dV, power, temperature, Aux voltage, Calc voltage, dT/dt, Loop time, EocV
Data sampling condition by each step : time, dV/dt, dI/dt, dT/dt, dV2/dt
And/Or logic in cut-off condition setting
Menu Selection(Pre-defined techniques)
Lithium battery application mode menu
CC charging/discharging mode menu
Pulse Capability(GSM/CDMA application): Option
Oscilloscope capture Pulse test data(option)
Real time display: time, voltage, current, channel status
channel status color display: charging, discharging, standby, idle, calibration
Always activated window(This widow does not hidden)
Can be located outside of main program window.
displayed test data: status, running time, step number, cycle number, step time, current range, current, voltage, capacity, power, energy, Aux V, Calc V, temp, cycle file name, data file name, file size.
Detailed monitor type selection: All channels, running channels only, grouped channels
Activated character only for running channels.
Classification/Grouping each channels by users purpose
Labeling each group by operator name, chemistries etc. Group monitoring available by this setting.
Multiple plot formats
User can define axis with specified parameters under each graph format.
General graph format
Current-Voltage vs. time graph Current-voltage vs. cycle time graph
Cycle graph format
charging capacity-discharging capacity vs. cycle number graph
Real time plotting
Step graph format
dQ/dV vs. Voltage graph(EVS)
General Function of Graph
DQ/dV vs. Voltage
Voltage vs. charging time
Voltage vs. discharging time
Voltage vs. charging Capacity(discharging capacity)
Voltage vs. capacity etc.. Plot overlay: Max. 10 plot
Universal Graphics: Any combination of X,Y,Y1 axis parameters
Automatic updating plot with reloading button for running channel data
Automatic/Manual scale and polarity selection for each axis
Cross hair pointer by mouse click/arrow key displays coordinate values
Text insertion on graph
Copy to Clipboard for usage in other application software
Grid On/Off and dot/line selection
Parameter change without reloading the data file
Data set On/Off: Data can be visible or invisible by selecting/ deselecting the data set.
ASCII file conversion of graph data only
Voltage vs. charging-discharging time graph Voltage vs. |charging-discharging capacity| graph
Cyclic voltammogram Tafel graph
General data report
Cycle data report
Capacity data report
Step data report
Calibration data report
Test program report
Automatic documentation; running time, Test memo, operator name, weight, test I.D etc.
4 points calibration for voltage and each current ranges
Check-out function with calibrated data for confirming accuracy
Calibrates a channel while other channels are running
To prevent wrong-calibration, error warning displays when error happens.
Linear calibration for + & - polarity with one procedure
Store & Backup calibration data
Create Potentiostat/Galvanostat mode or potentiostat mode test program file(Dual mode)
ASCII file conversion(TAB, comma, space delimited) of general data, cycle data, capacity data and step data
Maximum file size: 2GB
Split general data by cycle number
Max. Data file name: 15char + channel number(3digit)
Double safety check: Automatically stop the test run if the voltage /current/ temperature exceed the hardware specification or safety limit setting value on test program
Fail function: If the measurement value is different from control value, the test is stopped by fail check function in order to protect the cell and/or system failure.
Each channel has its own fuse to protect over current or voltage
While any channel is running, operator could not close the server program
Automatic cell mount detection
Closing function of all activated windows
Dual time input mode(9999sec or hh:mm:ss)
Independent server program
English version & Korean version available
Operating system: Windows2000/XP/Vista/7
Processor: Pentium4 or above
RAM: 512MB or above
VGA: 1024 x 768 or above
Interface: PCI bus or USB
Printer: most printers/plotters supported by Windows. (Color printer/plotter recommended)
|WonATech | WonA Building 7, Neunganmal 1-gil,SeoChoGu,Seoul,137-180 Korea | Phone:+82-2578-6516 | Fax:+82-2576-2635|