|About |Contact | Korean |

 

EChem News  Letter

e-mail address
Company Name
Country

Name


 

WBCS Battery Cycler

WBCS Battery Cycler System

System hardware was designed for stable and accurate instrument furthermore for easy expansion and maintenance.  WBCS series choose plug-in type module with independent power suppliers per 8ch substation. Each substation can be used as independent system with optional Stand Alone Kit or can be built up integrated system as add-on. These give flexibility to users application.

For stable and accurate instrumentation

4 probe type true potentiostat/galvanostat circuit: WBCS series are designed for  battery test(Li battery, Ni-MH, NiCd etc).

    High resolution 16 bit ADC/DAC: WBCS provides 0.0015% f.s resolution in control and aquisiton both.

    Channel isolation: To prevent any noise from the other channel, each channel is designed for isolation.

    Multiple current ranges(WBCS3000: 4 ranges): This improves the resolution and accuracy in control and measurement of current. Auto/manual selection

    Maximum channel No.: 128ch

  • WBCS3000L (Low current type): Voltage range: +/-10Volt  Max. Current: +/-10mA(L) +/-100mA(Le)
  • WBCS3000S(standard type) : Max 50Watt (Max. Voltage: +/-40Volt   Max. Current: +/-5Amp)
  • WBCS3000M1(100Watt):Max. Voltage: +/-40Volt   Max. Current: +/-10Amp
  • WBCS3000M2(200Watt):Max. Voltage: +/-40Volt   Max. Current: +/-20Amp
  • WBCS3000Dual(400Watt):Max. Voltage: +/-40Volt   Max. Current: +/-20Amp
  • WBCS3000HP(High Power type) Max.4Kwatt( Max. voltage: +/-40V   Max. Current: +/-200A)
 

     http://www.zivelab.com/img/wbcs3000l32.png

System Requirment

    Operating system: Windows7/8/10
    Processor: Pentium or above
    RAM:   1024MB or above 
    VGA: 1024 x 768 or above, True color
    Interface: LAN
    Mouse
    Printer: most printers/plotters supported by Windows. (Color printer/plotter recommeded)


Options

    Shield Cell cable(1m, 1.5m, 2m, special cable)
    Battery Holder: Easy to mount/demount cell(battery) type Plug-In  battery holder
    Auxiliary voltage input plug-in module(8ch): To measure Aux V and Calc V. Voltage ranges are user selection.
    Temperature input plug-in module(8ch)
    Stand Alone Kit(Interface card & cable, Software)


Inquiry: sales@wonatech.com 

Model Links

          *       Low current type WBCS3000L(Max. current: 10mA or 100mA)

           *       Standard type WBCS3000S(Max. current: 5A)

*        Mid power type WBCS3000M1(Max. 100Watt per channel)

*        Mid power type WBCS3000M2(Max. 200Watt per channel)

*        Mid Power type WBCS3000Dual(Max. 400Watt per channel)

*        High power type WBCS3000HP(>400Watt per channel)l)

Related Links

WBCS Software Introduction

WBCS catalog download(pdf)