outstanding multichannel potentiostat/galvanostat/FRA,
is the best choice for multiple samples
characterization simultaneously or independently with the complete DC and impedance test.
System is designed under FPGA and DSP control with
high speed capability with
DAC control: Two set of high speed
bit DAC(50MHz) for offset & scanning & one
set of 16bit DAC(1MHz) for auxiliary analog output
ADC Reading: Two set of 16 bit 500kHz ADC for
reading voltage/current and 4 channel 16
bit 250kHz ADCs for auxiliary data input such as
auxiliary voltage etc. It can provide high frequency
fast pulse techniques with options and high speed sampling
ZIVE MP5's each
channel is equipped with a frequency response analyzer(FRA) for system as
standard and it provides high performance impedance measurements over the
frequency range 10uHz to 1MHz. ZRA(zero resistance ammeter) function can
measure max 5 A in galvanic corrosion technique. ZIVE MP5 can be easily upgraded
with adding optional application software package without returning the system
to the factory for upgrade.
ZIVE MP5¡¯s each channel comes
with additional three analog inputs (auxiliary voltage input) and 1 analog
output, whereas 3 digital outputs and 2 digital inputs and one temperature input
for K type thermocouple. It will help user expand the usage
User can measure the voltage between working electrode and counter electrode and
between counter electrode and reference electrode adding to measurement between
working electrode and reference electrode using 2 additional analog
inputs(auxiliary voltage inputs).
2. Using analog output, it can control
rotating speed of rotator, MFC flow rate etc. by +/-10V full scale.
User can control on/off of max 3 devices by DO etc.
When communication failure between PC and ZIVE MP5 occurs, running channel
will continue the experiments and save the data into ZIVE memory up to 350,000
data point set. When the communication is recovered, ZIVE will transfer saved
data to PC. User can transfer data set from ZIVE to PC anytime. This function
will be highly efficient for long time experiment.
User can define safety condition setting by inputting his/her own safety
levels for voltage, current, temperature etc. If the measurement value exceeds
this setting value, the system will automatically stop to protect the system and
If control value of voltage or current is different from measured value, the
experiment will be stopped automatically to protect the cell.
Automatic calibration function is supplied for user
The system is controlled from a PC via USB or an Ethernet
The 8 channel system can be expanded to 16ch, 24ch etc.
using USB hurb.
1. The system has its
own hardware parameters and calibration data.
2. The channel is
plug & play type and easy to install or to be removed (just plug-in or plug
ZIVE MP5 multichannel
electrochemical workstation is ideal for fundamental research in
electrochemistry, development and quality assurance of new sensors,
corrosion/coatings, electrode material, membrane, conducting polymer, evaluation
power device research such as battery materials, fuel cells, super capacitors
and solar cells.