|About |Contact | Korean |

 

EChem News  Letter

e-mail address
Company Name
Country

Name


 

WonATech’s  Fuel Cell hardware fixture

*        PEMFC fuel cell fixture (Max temp <200C)

*   Rod heater (220VAC) should be used

 

*   Active area; 5, 10, 25, 50, 100cm2 ;Other size is available on request

consists of

*  Graphite plate (Select flow pattern type on order)  2ea

*  Gasket

*  Current collector plate(Gold plated) 2ea

*  End plate (Aluminum)

*  rod heater 100Watt

 

*   Option

*  Rod type thermocouple

 

 

*        Parts

*  Active area; 5, 10, 25,50,100 cm2 ;Other size is available on request.

*  Flow field examples(Serpentine type) Strait / column/ user designed flow filed available

   

 

   

 

*  Current collector plate (Gold coating))

 

 

*  End plate (Aluminum)

 

 

Membrane Conductivity Cell

*       MCC Catalog Download

 

The membrane conductivity cell, MCC, is designed to measure ionic conductivity by simply loading a

membrane into cell hardware. The MCC adopts 4 point probe for measuring conductivity. By passing a

current through two outer electrodes and measuring the voltage through the inner electrodes allows the

measurement of the conductivity. In the 4-electrode configuration, there is virtually no current flow at

the inner voltage sensing electrodes. Therefore, polarization does not occur. A second benefit of the 4-

electrode sensor is its tolerance of electrode coating. Since the 4-electrode technique measures potential

drop rather than resistance, the measurement remains accurate, despite minor coating. The 2 probe

measurement is also available by attaching the working and sensing electrical connections to the cathode

side while attaching the counter and reference electrical connections to the anode side. Please see the

below configuration.

By placing the conductivity cell between the anode and cathode conduction plate, you can simply

assemble the conductivity cell into your fuel cell hardware

MCC kit

MCC with fuel cell hardware

 MCC parts